Adding or Removing a Vent from a Single-Phase Induction Motor
By option, you can add a vent to a single-phase induction motor. To add a vent:
- Select the rotor icon in the Project Manager tree.
- Right-click to select Insert Vent.
The vent icon appears under the rotor.
To remove a vent from a rotor in a three-phase induction motor.
- Select the rotor icon in the Project Manager tree.
- Right-click to select Remove Vent.
The vent icon disappears under the rotor.
The Vent data for the stator includes the following fields.
|
Holes per row |
Number of axial vent holes per row. |
|
Inner hole diameter |
Diameter of vent holes in inner row. |
|
Outer hole diameter |
Diameter of vent holes in outer row. |
|
Inner hole location |
Center to center diameter of inner hole vents |
|
Outer hole location |
Center to center diameter of outer hole vents. |