Icepak Classic Plate Conversion
The table below details Icepak Classic Plate properties and their effect on boundary condition assignments in the Electronics Desktop.
| Icepak Classic Plate Properties | Electronics Desktop Boundary Condition |
|---|---|
| Thermal model is Adiabatic thin | Adiabatic Plate |
| Thermal model is Conducting thin | Conducting Plate |
| Thermal model is Conducting thick or Hollow thick and Total power is non-zero | Block |
| Thermal model is Conducting thick or Hollow thick and Low side and/or High side Resistance is enabled | Stationary Wall(s) at the high side and/or low side |
| Thermal model is Conducting thick or Hollow thick, Low side and/or High side is enabled, Resistance is disabled, and Radiation is enabled | Source(s) at the high side and/or low side |
| Thermal model is Contact resistance | Conducting Plate |