Icepak Classic Heatsink Conversion
The table below details Icepak Classic Heatsink properties and their effect on Icepak native component creation and boundary condition assignments in the Electronics Desktop.
| Icepak Classic Heatsink Properties | Electronics Desktop Native Component | Electronics Desktop Boundary Condition |
|---|---|---|
| Type is Detailed and Detailed fin type is Extruded | Heatsink with Fin Type set to Extruded | n/a |
| Type is Detailed and Detailed fin type is Cross cut extrusion | Heatsink with Fin Type set to Crosscut Extrusion | n/a |
| Type is Detailed and Detailed fin type is Bonded fin | Heatsink with Fin Type set to Extruded | Conducting Plate assigned to all the bottom faces of the fins |
| Type is Detailed and Detailed fin type is Cylindrical pin | Heatsink with Fin Type set to Cylindrical Pin | n/a |
| Type is Detailed and Interface resistance is enabled | Heatsink with Fin Type set according to Detailed fin type | Conducting Plate assigned to all the bottom faces of the fins |