Mesh Link Requirements

If you want to reuse a mesh from an existing source design, make sure that the geometries in the target and source are identical. This is a requirement for a mesh link. There are two ways to generate geometrically equivalent models.

• Copy the entire source design and paste it in the Project Manager window to create the target design.
• Use Import from Clipboard as follows:

1. In the model window of the source design, press Ctrl+A to select all the objects.
2. Right-click the Modeler field and select Edit>Copy from the short-cut menu.
3. On the target design, go to Modeler>Import from Clipboard to paste in the design.

After you paste using one of the above methods, create a solution setup in the target, select Import Mesh on the Options tab, and link the mesh from the Setup Link dialog box.