Rotating the Phase of N-Port Data

You can rotate the phase of an N-port’s S-parameter data. This is done under the Network Data tab in the N-Port Data window.

1. Click the Network Data tab in the N-Port Data window.
2. Click Phase Rotation.
3. If you select Specify Distance and Effective Dielectric Constant, enter a distance in the Length field and a dielectric constant value in the Keff text box.
4. If you select Time Delay, enter the delay time in the Time field and select a unit in seconds on the list.
5. Click Update.
6. Click OK.

Phase rotation is calculated for the N-port data and you return to the Network Data tab.