The attributes "Corner" and "Round" appear in the BendType menu. The legacy attributes "Mitered (Legacy)" and "Curved (Legacy)" also appears if present in the design.
APDPath
- The "Round" BendType is the same as the bend type used in APDPath.
- The legacy APDPath is replaced by a line with a "Round" CapType and “Round" BendType.
- The APDPaths imported from Cadence APD/Allegro files via File > Import > Cadence APD/Allegro/SiP, and the APDPaths stored in old adsn files, are regarded as lines with "Round" CapType and "Round" BendType.
- To change a path Type to "Cadence APD/Allegro:APDPath", change the path Type to "line". Then set the CapType and BendType to "Round".
Scripting
- Any scripting command that converts any kind of path to APDPath, converts the target path to a line with "Round" CapType and "Round" BendType.
- Any scripting command that converts Bend Type of a line to "Mitered" or "Curved", converts the BendType of target line to "Corner".