Importing Plot Data

When a report is open in Ansys Electronics Desktop, the Report2D menu appears.

The Report2D> Import Data command lets you import plot data from comma delimited files (*.csv), tab delimited files (*.tab), Ansoft PlotData files (*.dat), post-processor files (*.txt), or Ansoft ReportData files (*.rdat).

1. From the top menu bar, click Report2D > Import.

   The Open window appears.

2. Browse for and select the desired file.
3. Click Open to import the file into the current report.

   The imported traces appear in the Project tree under the current report.

   Note:

   For a report trace where the primary sweep is NOT the same as the x-component, an export report then import report may not produce the same curve. In this circumstance, only *.rdat import the same curve/trace. For other formats, the import produces two separated traces.