Viewing the Max Magnitude of Delta S Between Passes
For solutions with ports.
At any time during or after the solution process, you can view the maximum change in the magnitude of the S-parameters between two consecutive passes. This information is available after two or more passes are completed.
To view the maximum magnitude of delta S between passes:
- In the project tree, right-click the solution setup of interest, and then click Convergence on the shortcut menu.
The Solution Data window appears. The Convergence tab is selected.
The Max. Mag. Delta S column lists the maximum magnitude of delta S from one pass to the next.
The Max. Mag. Delta S area lists the target change in magnitude of delta S and the change in magnitude of delta S between the last two solved passes.
Delta S is computed on the appropriate S-parameters - modal or terminal - after the S-parameters have been de-embedded and renormalized.
You can renormalize mathematically, without having to re-solve, by accessing the postprocessing tab on the port definition panel and de-selecting the Deembed selection box.