Discarding Report Values Below a Specified Threshold

To prevent real small numbers from skewing a plot, you can discard small values (below a specifiable threshold).

1. Double-click the X or Y axis of interest on an open plot display.

   This opens the Properties window for the Axis.

2. Under the Axis tab, use the scroll bar to find the Specify Discard Values property.
3. Click the check box to enable the property.
4. Enter a value in the Discard Below field. Units specified elsewhere in the Axis property are applied to this value. The Discard Below text box is inactive if the Specify Discard Values check box is not enabled.
5. Click OK to apply the Discard Values to the report.