Viewing Distribution Results for a Statistical Analysis

1. In the project tree, right-click the statistical setup for which you want to view the distribution results calculated for the solution quantities, and select View Analysis Result.

   The Post Analysis Display dialog box appears.

2. Select the statistical setup with the results you want to view from the drop-down menu at the top of the dialog box.
3. To view the results in tabular form, select Table as the view type.

   The distribution results for the selected solution quantities are listed in table format for each solved design variation.

4. Optionally, click a design variation in the table, and then click Apply (at the far right side of the dialog box).

   The design displayed in the Modeler window is changed to represent the selected design variation.

5. To view the results in graphic format, select Plot as the view type.
6. Type the number of bins you want to plot on the x-axis.
7. Select the solution quantity for which you want to plot distribution results on the y-axis from the Y drop-down menu.

   A histogram plot appears in the Post Analysis Display dialog box. It displays the distribution of the selected solution quantity.

8. Optionally, click a design variation in the table, and then click Apply (at the far right side of the dialog box).

   The software now points to the selected design variation as the nominal solution and as a result, the design displayed in the Modeler window changes to represent the selected design variation.

   Click Revert to return the design in the view window to the original value.