Overriding the Min. and Max. Variable Values for a Single Sensitivity Setup

1. In the Setup Sensitivity Analysis dialog box, click the Variables tab.

   All of the variables that were selected for sensitivity analysis are listed.

2. Type a new value in the Min or Max text box for the value you want to override, and then press Enter.

   The Override option is now selected. This indicates that the value you entered is to be used for this sensitivity analysis; the variable's current Min or Max value set in the nominal design is ignored.

   • Alternatively, you can select the Override option first, and then type a new value in the Min or Max text box.
3. Optionally, click a new unit system in one of the Units text boxes.

   To revert to the default minimum and maximum values, clear the Override option.