Report2D Options: General Tab

These options are set on the General tab of the Report2D Options window.

1. Background Color — set the color by double-clicking to open the Set color window. Select a default or custom color and click OK.
2. Contrast Color — set the color by double-clicking to open the Set color window. Select a default or custom color and click OK.
3. Highlight Color — set the color by double-clicking to open the Set color window. Select a default or custom color and click OK.
4. Accumulate Depth — sets the maximum number of accumulated traces on a single report. When Accumulate Depth is turned on (i.e., set to a non-zero value),run an analysis to generate a plot, then change some parameter value(s) and run another analysis. The newly generated plot now contains both old and new results that can then be compared. The plot keeps adding new results with each subsequent analysis until the accumulate length is reached.
5. Curve Tooltip Option — click the check boxes to toggle the following properties:

1. Show Trace Name
2. Show Variation Key
3. Show Solution Name

6. Clipboard Option - specify the following properties:

1. Capture Aspect Size Ratio — this can be As Shown or Full Screen.
2. Capture Background Color — this can be As Shown or White.