Renormalize Ports Based on HFSS Data

If there are HFSS designs within your Ansys Electronics Desktop design, renormalize the characteristic impedance of the circuit ports to the port impedance of one of the HFSS ports. To do so:

1. Double-click the port you want to renormalize in the schematic to open the Port Definition window.
2. Click One port data to enable a drop-down menu that displays the HFSS ports in the active design.
4. Select the appropriate HFSS design and port.
5. Select Use characteristic impedance (Zo) or Use impedance matrix.
6. Click OK.

The circuit ports are renormalized to the characteristic impedance of the HFSS port as a function of frequency and design parameters. For more information, see Editing an Interface Port Definition.