The input parameters for the lid-driven cavity verification case setup are listed in Table 4.2: Lid-driven cavity case input parameters..
Table 4.2: Lid-driven cavity case input parameters.
| Parameter | Value | Unit |
|---|---|---|
|
Physical Model: | ||
| Thermal Model | Enabled |
- |
| Gravity (X) | 0 |  |
| Gravity (Y) | 0 |  |
| Gravity (Z) | 0 |  |
|
Wall Geometry: | ||
| Square Cavity Side (L) | 1.0 | m |
| Square Cavity Thickness | 0.05 | m |
| Lid Velocity (V) | 1.0 | m/s |
|
Fluid Properties: | ||
| Element size | 10 | mm |
| Initial Density | 10 |  |
| Dynamic Viscosity | 0.1 |  |
| Sound Speed | 10.0 | m/s |
| Boundary Type | No Slip Laminar | - |
| TurbulenceType | Laminar | - |
| Viscosity Type | Morris | - |
| Poission's Correction Type | None | - |
| Volumetric Inlet SPH Mass | 1.0 | kg |
|
Solver Parameters: | ||
|
Simulation Duration |
60 |
s |