Ansys LS-DYNA

The following properties can be exported to Ansys LS-DYNA, depending on which data table you are exporting from, and which model you select.

MaterialUniverse

  • Density
  • Elongation
  • Poisson's ratio
  • Tangent modulus
  • True plastic stress-strain
  • Yield strength (elastic limit)
  • Young's modulus

MMPDS-2024

  • Density
  • Elongation, L
  • Modulus, L
  • Poisson's Ratio (L-dir) with Temp.
  • Poisson's Ratio, L
  • Tens. Yield Stress (L-dir) with Temp.
  • Tensile Modulus (L-dir) with Temp.
  • Tensile Stress/Strain, L
  • Yield Strength, L

Sheet Steels

  • 0.2% Yield strength (Transverse, 23°C)
  • Data disclaimer
  • Density
  • Direction-dependent yield stress_00 direction
  • Direction-dependent yield stress_45 direction
  • Direction-dependent yield stress_90 direction
  • Elongation, onset of instability (Transverse, 23°C)
  • Flow potential exponent (Barlat)
  • Forming flow curve
  • Forming limit curve
  • Kinematic hardening parameters (Chaboche-Rousselier)_A1
  • Kinematic hardening parameters (Chaboche-Rousselier)_A2
  • Kinematic hardening parameters (Chaboche-Rousselier)_A3
  • Kinematic hardening parameters (Chaboche-Rousselier)_A4
  • Kinematic hardening parameters (Chaboche-Rousselier)_C1
  • Kinematic hardening parameters (Chaboche-Rousselier)_C2
  • Kinematic hardening parameters (Chaboche-Rousselier)_C3
  • Kinematic hardening parameters (Chaboche-Rousselier)_C4
  • Lankford parameters (R-values)_00 direction
  • Lankford parameters (R-values)_45 direction
  • Lankford parameters (R-values)_90 direction
  • Poisson's ratio
  • True stress vs Plastic strain
  • Yield surface parameters_Stress, XX
  • Yield surface parameters_Stress, XY
  • Yield surface parameters_Stress, YY
  • Yield surface parameters_Tangent, XX
  • Yield surface parameters_Tangent, XY
  • Yield surface parameters_Tangent, YY
  • Young's modulus (nominal)
  • Young's modulus vs Plastic strain, Kinematic hardening